Time Slider preferences

You can set the following preferences in the Time Slider category of the Preferences window.

To return to the default factory settings, choose Edit > Restore Default Settings in this window. Note that this resets the preferences in every category in the Preferences window.

Note: To open the Preferences window with the Time Slider category selected, click the Animation Preferences icon in the lower-right corner of the Maya window.

Time Slider

Framerate
Set a frame rate for the current scene.

Frame selections include: 2 fps, 3 fps, 4 fps, 5 fps, 6 fps, 8 fps, 10 fps, 12 fps, 15 fps, 16 fps, 20 fps, 23.976 fps, 24 fps (Film), 25 fps (PAL), 29.97 fps, 29.97 df (drop frame), 30 fps, 40 fps, 47.952 fps, 48 fps (Show), 50 fps (PAL Field), 59.94 fps, 60 fps (NTSC Field), 75 fps, 80 fps, 100 fps, 120 fps, 125 fps, 150 fps, 200 fps, 240 fps, 250 fps, 300 fps, 375 fps, 400 fps, 500 fps, 600 fps, 750 fps, 1200 fps, 1500 fps, 2000 fps, 3000 fps, 6000 fps, 44 100 fps, and 48 000 fps.

Keep keys at current frames

By default when you change the current time unit, the times for any existing keys are modified so that playback timing is preserved. For example, a key set at frame 12film changes to frame 15ntsc when the current time unit is changed to NTSC, since they both represent a key at 0.5 seconds. When this option is on, it leaves the key at 12ntsc that was originally at 12film. The default setting for this option is off. The option turns on once the current Time unit is changed above.

Round time ranges to whole values

Activate this setting to retain whole frame values whenever frame rates change. Sometimes changing the frame rate in Maya converts current frame, frame range, and animation range numbers to decimal value numbers.

This option is active by default. Disable it if you want frame numbers to be precise after changing the frame rate, for example, 24.80.

Playback start/end

Specifies playback range start and end times. The playback start and end times specify the Time Slider playback range. The playback range is always within the animation range. You can also specify the time units. See Edit animation preferences.

Animation start/end

Specifies animation range start and end times. The animation start and end times specify the Range Slider range. The playback range always stays within the animation range, so changing the animation start and end times can also change the playback start and end times. Default animation start time is 1.00. Default animation end time is 48.00. You can also specify the time units. See Edit animation preferences.

Blue Pencil Frames
Choose when you want the Blue Pencil frames to display:
Off
Blue Pencil frames never show on the Time Slider.
Context Active
Blue Pencil frames show on the Time Slider only when the Blue Pencil tool is the active tool. See Draw in the Viewport with Blue Pencil.
Always
Blue Pencil frames always show on the Time Slider.
Key ticks

Specifies how the line markers that indicate keys appear on the Time Slider. Click None, Active, or Channel Box. Default is Active.

  • None: Specifies that key ticks are not displayed. Selecting None is useful if you have a lot of keys and want to improve workspace selection performance.
  • Active: Specifies that key ticks are displayed, with associated keys available for selection and editing.
  • Channel Box: Specifies that key ticks appear only for the currently selected channels in the Channel Box. This is useful if you are using the Time Slider to edit keys on particular channels of an animated object.
  • Smart: Allows you to switch between displaying all key ticks and key ticks associated with specific channels.
Key tick size

Change the thickness of ticks that represent keyframes in the Maya Time Slider. Key thickness is measured in pixels. Click 1x (default width), 2x (double width), or 3x (triple width).

Time Display
Select what format Time information appears on the Time Marker:
  • Frames: Displays frames on all time rulers, current time markers, and input fields which display or accept time.
  • Timecode: Displays video standard timecode on all time rulers, current time markers, and input fields which display or accept time.
  • Timecode and frames on Time Marker: Displays video standard timecode on timemarkers while time rulers shown frames. This is the legacy display when Timecode is set in the in the Time Slider options in the Time Slider Preferences
Note: An asterisk "*" appears next to any number in the Time Slider that has been rounded to the second decimal place to indicate the value has been approximated. This happens sometimes when you switch between Time Code and Frames or if the Snap to Whole Frames option is disabled in the Time Slider preferences.
Channel Box Sync
Sync Timeline Display

When on, synchronizes your selections in the Channel Box to the Time Slider so that the Time Slider displays only keys for those selected channels. When you set a keyframe (press S or select Key > Set Key), only channels selected in the Channel Box are keyed. If nothing is selected in the Channel Box, the Time Slider displays keys for selected objects as usual.

Sync Selection in Graph Editor
Note: In earlier versions of Maya, this option was named Sync graph editor display.

When on, synchronizes your selections in the Channel Box to also display in the Graph Editor. If no channels are selected in the Channel Box, the Graph Editor displays curves for selected objects as usual.

Current time indicator
Snap to whole frames: When on, Maya steps through animation times by integer values, snapping to the nearest integer. The default is on. If working with sound or small time ranges, you can turn off Snap to whole frames for smoother scrubbing.
Auto snap keys

When on, keys snap to the nearest whole frame when they are moved or scaled. When scaling, if two keys snap to the same frame, they merge together into one key. This preference is off by default. You can also right-click the Time Slider and select Auto snap keys.

Note: You must have the Current time indicator Snap to whole frames setting turned on. If Snap to whole frames is off, then the Time Slider will not snap to anything. This is true for moving, scaling, or scrubbing.
Tick Span
Specifies the way key ticks are displayed when zooming in or out in the Time Slider. Tick span is measured in multiples of 24, so you can display ticks every 6, 12, 24, or 48 frames. The default value for this preference is 0.
Show keys from upstream animation curves
Activate this option to display all keys from upstream animation curves on the Time Slider. This setting overrides the Time Slider Animation Controls menu Active and From Channel Box options in the Display Key Ticks rollout.
Note: To display key ticks for animated shading and texture attributes on the Time Slider, you must first select the Shading Group node in the Node Editor or Hypershade window.

Playback

Playback speed

Specifies the speed at which your scene plays. Select Play Every Frame, 24fps x 1, 24fps x 0.5, 24fps x 2, or Other, which activates a field where you can enter a custom playback speed. Playback speed uses the frame rate set in the Working Units section of the Settings preferences. The default is Play Every Frame.

You can also specify the playback time units. See Edit animation preferences.

Play every frame

When selected, all the frames in your scene play, updating each before displaying the next. The speed depends on how long it takes your workstation to compute and draw each frame. You can specify the playback frame increment in the Playback by field. For example, a Playback value of 2.0 plays only every other frame.

24fps x 1

When selected, your scene plays at the frame rate set in the Working Units section of the Settings preferences. (The default fps in Maya is 24 frames per second). Maya may not display all frames, depending on your workstation’s capabilities, the scene’s complexity, and the display mode (for example, wireframe or smooth shading).

24fps x 0.5

When selected, your scene plays at half the speed set in the Working Units section of the Settings preferences.

24fps x 2

When selected, your scene plays at twice the speed set in the Working Units section of the Settings preferences.

Other

When selected, your scene plays at the custom playback speed specified with the Other Speed setting.

Other Speed

Available only when Playback Speed is set to Other.

Let you set a custom playback speed (in frames per second) for your scene. For example, if you specify an Other Speed value of 72, animation plays back at 72 fps.

Playback by

Specifies playback increments if Playback speed is set to Play Every Frame. For example, if you enter 4, Maya plays only every fourth frame (or time). Default is 1.000. You can also specify the playback time units.

Max Playback Speed

Lets you clamp the animation playback speed by specifying a value the speed cannot exceed. This is useful when working with scenes that have fluctuating levels of heavy CPU activity, such as a scene with a complex particle effect.

Free

Specifies no Max Playback Speed.

24 fps x 1

Specifies that the overall playback speed of your scene’s animation is as fast as possible, but it does not exceed 24 fps.

24 fps x 0.5

Specifies that the overall playback speed of your scene’s animation is as fast as possible, but it does not exceed 12 fps.

24 fps x 2

Specifies that the overall playback speed of your scene’s animation is as fast as possible, but it does not exceed 48 fps.

Update view

If your workspace layout includes several views (for example, selected from Panels > Layouts), you can improve performance by having the scene play in only the currently active view. Click Active or All. Default is Active.

Active

Scene plays only in the current, active view.

All

Scene plays in all the workspace views.

Looping
Specifies what happens when the scene plays forward and then reaches the playback end time (or if playing backwards, the playback start time). Click Once, Oscillate, or Continuous. Default is Continuous.
Note: You can quickly set looping options using the Loop icon in the Playback Options, next to the Range Slider.
Once
Specifies that the scene plays once and then stops.
Oscillate
Specifies that the scene plays forward (or backward) and then plays backward (or forward) until you stop playback.
Continuous
Specifies that the scene plays forward (or backward) and then plays backward (or forward) until you stop playback.
Loop play range when stepping frames and keys
Toggles looping the Playback range rather than continuing through the entire animation. Turn this option off to so that animation playback progresses to the end before looping.
For information on the playback range, see Range Slider.
  • Step forward one frame, animation loops to the first frame in the playback range. For step backward one frame, animation loops back to the last frame in the playback range.
  • Step forward one key loops animation forward to the first key in the playback range. For step backward one key, animation loops backward to the last key in the playback range.
This option is on by default.